We offer superior quality Hacksaw Machines to our clients. These machines are precision engineered so as to meet the modern demands of several industries. Due to their smooth & swift functioning ability they are able to operate in a spontaneous way which aids the worker in consistently carrying his work with ultimate efficiency. Some of the specifications of this hacksaw machine are following:
Bed: The bed is available as a single piece casting. It has wide rigid casting for the collection of coolant, swarf and also houses the V-belt device.
Saw Frame: The rigid saw frame ensures a square & parallel cut & the cut takes place on the backward pull stroke. To prevent the wear of the blade, it is hydraulically lifted out of contact with work place on the forward stroke up.
The Drive: The drive is attached through V-Pulleys with provision to adjust the complete tension of the V-Belts. The shafts are fitted with ball bearings and taper and ball bearings to eliminate friction.
Speed: Specific speeds has been provided for different kind of metals in order to make it suitable. High speed for metals like mild steel, brass, copper etc. and low speed for cast iron.
Feed Saw: Two levers are provided to hydraulically control the Feed Saw at the dash-pot. One controls the rate of feed and the other enables the bow slide to be raised or lowered and after the completion of the cut, the motor gets automatically switched off.
Vice: The vice is rigid construction. It has two jaws, one jaw remains fixed and the other is adjusted according to the size of the material to be cut.
Coolant: A coolant tank is enclosed within the base of machines with constant speed to supply continuous cooling to the saw blade.
Electricals: A Push button starter is fitted with an adjustable trip mechanism that helps in stopping the machine soon when the blade is clear from the work at extra cost.
We offer Horizontal Swing Type Bandsaw to our clients that is known for its superior performance. Supreme efficiency and long term durability are blended in this bandsaw machine. Our bandsaw machines are highly appreciable because of their durability and unparalleled service. Further, this bandsaw features:
Offered by us is a wide range of Double Column Bandsaw Machine to the clients. These horizontal bandsaw machine are engineered in compliance with the international quality standards. Vertical Bandsaw Machine are basically metal cutting machines used in heavy industries.
Cutting Cap. In mm Round Square
210 × 210
300 × 300
525 × 525
650 × 650
800 × 800
1000 × 1000
1250 × 1250
1500 × 1500
Blade Size (in mm)
3505 × 27
4100 × 34
5800 × 41
8000 × 67
8800 × 67
12300 × 67 or 80
13100 × 67 or 80
16100 × 80
Saw Motor (in mm)
25 or 30
Chip Conveyor Motor HP
Over Dimensions For DBCSA Model
Cutting Speed (m/min)
20 to 100 mtr/min in steps std. Supply suitable for cutting all types metals ranging of hardness BHN 70 to 350
440 V + 10% 50 Hz. 3 Phase, AC Supply Control Circuit with 220 V Standard Supply
ACCURACY & OUT PHASE
100mm 0 ± 0.1mm
Benefits of Machine :
Vibration less operation for better accuracy
Replacement of component / part is easy
Precision work can be done
Accurate technical feature
User's friendly machine
Maintenance cost is very less
Machine life is very high
Optional Features :
Bundle cutting attachment
Conveyor table for mass production
Provisional for conversion of semiautomatic to Automatic machine features
We offer Horizontal Swing Type Bandsaw (B250 HDHL DA) to our clients that is known for its superior performance. Supreme efficiency and long term durability are blended in this bandsaw machine. Our bandsaw machines are highly appreciable because of their durability and unparalleled service. Further, this bandsaw features: